Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installing the
-
inverter module
(continued)
-
Fig.6
Mount inverter module with the screws enclosed (3)
-
First tighten screws (3) with 1 Nm slightly
-
Subsequently tighten screws (3) with 4 Nm
Connect electric connections by means of the screws (1) and (2)
-
Tighten screws (1) with 1.5 Nm
-
Tighten screws (2) with 3 Nm
Plug in 12-pole Molex plug
-
Plug in 12-pole Molex plug (4) at X8
on FMW 22 print
-
Mount side panels
(4)
10 10
Werbung
