System Configuration - Conceptronic CM3PVRL Benutzerhandbuch

ENGLISH
When you select the 'Setup' [6] option in the Main Menu, or press the 'Setup' button (21) on the remote
control, the Setup Menu will be shown on your screen. The explanation below shows all available settings
with the including description.
System:
TV System
Screensaver
Sys Language
Time Format
Set Date
Set Time
Reset Setting
A/V Set:
Video Output
TV Type
Tools:
Format
File Sorted By
Slideshow Time
Adv. A/V:
Contrast
Hue
Saturation
Brightness

12. System Configuration

Select the TV System which corresponds with your TV. You can select between PAL
and NTSC. (Default = PAL)
Set the screensaver of the unit on or off. (Default = On)
Select the system language for the unit. (Default = English)
Set the time format of your choice. (Default = D_M_Y_24)
Set the current date.
Set the current Time.
Reset the unit to the factory default settings.
(Only the configuration will be restored. The data on your Harddisk will not be
erased).
Select the Video Output signal which corresponds with the used output ports on the
unit.
Set the 'TV Type' to the correct aspect ratio of your TV.
('4:3 PS' (Pan & Scan), '4:3 LB' (Letterbox) or '16:9' (Widescreen)).
Use the 'Format' option to format your Internal HDD, your USB Device or your
Memory Card for optimal use with the unit.
Change the way the files are sorted when you are browsing your media files.
Change the time a photo is shown on your screen when you are using the slideshow
feature.
Change the Contrast of the A/V Input Signal.
Change the Hue of the A/V Input Signal.
Change the Saturation of the A/V Input Signal.
Change the Brightness of the A/V Input Signal.
47