Initial Installation - Megasat Royal Line III Smart 19 Bedienungsanleitung

5. Initial installation

1. Connect the TV to the power supply and switch on the power switch on the back of the housing. The
TV is now in standby mode (LED lights RED).
2. Press the Power button on the remote control (LED lights BLUE).
3. After the television has started, the initial installation menu appears. You can now make the follo-
wing settings:
Note:
Press the t u buttons to go to the next or previous step.
Select your menu language and then go to the
next step.
If you want to connect the TV to a router via WLAN,
select the name in the list and confirm with OK.
Enter the password of the Internet router here.
Then press Connect to establish a connection.
Alternatively, the TV can also be operated via
a LAN cable (RJ45). Connect the cable to your
Internet router to establish a connection to the
Internet. Note: You can change the setting at any
time via the menu Settings/Network & Internet.
ENGLISH 09