Megasat Royal Line III Smart 19 Bedienungsanleitung Seite 50

6. Main menu
6.3 Programs
DTV manual search.
Satellite
Select the desired satellite.
Transponder
Select the Search option and confirm the
selection with OK. Now select the desired TP
with the pq buttons and confirm with OK.
Now you have the option of searching the
transponder for stations. Select the desired op-
tions (see automatic search).
Then select the Search option and confirm your selection with OK. The channel search starts num
with your pre-selected options.
You also have the option of checking the signal strength and signal quality.
You can edit the TP using the RED/GREEN/YELLOW colour selection.
Transponder
Delete (RED button)
Edit (GREEN button)
New (YELLOW button)
5V Antenna voltage
5V antenna voltage is only required for active DVB-T antennas.
16
Deletes the selected transponder. Confirm the irrevocable deletion
process with OK.
Change the frequency, symbol rate and polarity of the selected
transponder. Then confirm with OK.
Add a new transponder. Enter the frequency, symbol rate and
polarity of the new transponder. Then confirm with OK.
ENGLISH