First Installation - Megasat Classic Line 19 Bedienungsanleitung

5. First installation

1. Connect the TV to the power supply and turn on the power switch at the bottom of
the housing. The TV is now in standby mode (LED is RED).
2. Then press the Power button on the
remote control (LED is GREEN).
3. After the TV is started, the First Ins-
tallation menu appears. You can now
make the following settings:
• Language:
• Country:
• Home-state:
• Enter button:
Tuning Setup
Reception mode:
Digital Typ:
Defaults for signal search
DVB-S (Satellit)
Satellit:
Astra 19.2° Ost
Search mode:
Standard
Channels type: Alle Kanäle
Service type:
Alles
Once you have made all settings, start the channel search with Enter.
Note: In satellite mode, you can load the preset channel list.
To do this, confirm the loading of the station list by pressing YES (left arrow). Press NO
(arrow key to the right) to perform a new search.
Select a language for the OSD. To modify, use the
Select the country. To modify, use the
Select the display attribute of the TV:
Home-mode = dynamic and high-contrast colors
Store Mode = neutral colors
Starts „Auto Tuning" for Terrestrial, Cable or Satellite television.
Use the keys to select the reception mode
t u
ATV (analogue) and/or DTV (digital)
Choose between Satellite, DVB-C or DVB-T
DVB-T (Terrestrial)
No further settings required.
ENGLISH
keys.
t u
keys.
t u
DVB-C (Cable)
Scan Typ:
Full
Netzwerk ID:
Auto
Symbolrate:
Auto
09