Herunterladen Inhalt Inhalt Diese Seite drucken

Care And Cleaning; External Cleaning; Maintenance Wash - Electrolux WAL3E300 Benutzerinformation

Vorschau ausblenden Andere Handbücher für WAL3E300:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Do not mix different types of
detergents.
• To help the environment, do not use
more than the recommended quantity
of detergent.
• Follow the instructions that you find
on packaging of the detergents or
other treatments without exceeding
the indicated maximum level (
• Use the recommended detergents for
the type and colour of the fabric, the
programme temperature and the level
of soil.
12.4 Ecological hints
• Set a programme without the prewash
phase to wash laundry with normal
soil.
• Always start a washing programme
with the maximum load of laundry
allowed.

13. CARE AND CLEANING

WARNING!
Refer to Safety chapters.

13.1 External cleaning

Clean the appliance with mild soap and
warm water only. Fully dry all the
surfaces.
CAUTION!
Do not use alcohol, solvents
or chemical products.
CAUTION!
Do not clean the metal
surfaces with chlorine-based
detergent.
13.2 Descaling
If the water hardness in your
area is high or moderate, we
recommend that you use a
water descaling product for
washing machines.
Regularly examine the drum to check for
limescale.
• If you pre-treat the stains or use a
stain remover, set a programme with
a low temperature.
• To use the correct quantity of
detergent, check the water hardness
of your domestic system. Refer to
"Water hardness".
12.5 Water hardness
).
If the water hardness in your area is high
or moderate, we recommend that you
additive for water softening. In areas
where the water hardness is soft it is not
necessary to use him.
To find out the water hardness in your
area, contact your local water authority.
Use the correct quantity of additive for
water softening. Follow the instructions
that you find on the packaging of the
product.
The regular detergents already contain
water softening agents, but we
recommend to run a cycle with empty
drum and a descaling product
occasionally.
Always follow the
instructions that you find on
the packaging of the
product.

13.3 Maintenance wash

With the low temperature programmes it
is possible that some detergent stays in
the drum. Perform a maintenance wash
regularly. To do this:
• Remove all laundry from the drum.
• Select the cotton programme with the
highest temperature or use if is
available programme Machine Clean.
Add a small quantity of powder
detergent into empty drum, in order to
rinse out any left residues.
ENGLISH
27

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis