Pevino PN45S-HHB-1 Bedienungsanleitung Seite 6

FOR PN45D-HHB-1 / PN166D-HHB-1
Upper compartment: The temperature setting can be adjusted from 5℃ to 18℃.
Lower compartment: The temperature setting can be adjusted from 5℃ to 18℃.
Light

Control the interior light ON/OFF.
RUN

When it's ON, the cooling system runs.
Power

Control this appliance turn on/off. Press and hold this button for approximately
3 seconds.
"Set Upper" Button

To set the temperature of the upper chamber.
"Set Lower" Button

To set the temperature of the lower chamber.
"Upper Chamber"

Display the set temperature in upper compartment.
"Lower Chamber"

Display the set temperature in lower compartment.

Note: Press "Set Upper" or "Set Lower" button for 3 seconds, the actual temperature Will be display
in the zone. It will return to the set temperature by pressing any button.
Setting The Temperature Controls
Press once the button, the temperature will decrease or increase 1 ℃. When exceeding the minimum value
that can be established, it will jump to the highest adjustable temperature value automatically.
NOTE:

If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the Wine Cooler will not start.

When you use the wine Cooler for the first time or restart the wine Cooler after having been shut off
for a long time, there could be a few degrees variance between the temperature you select and the
one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once
the Wine Cooler is running for a few hours everything will be back to normal.
Internal light
This wine cooler is equipped with top and side internal lights that can be set to a blue, white, or amber
colour. You can choose to display each colour of light in two different modes. Automatic mode and Display
mode.
6