Pevino PN45S-HHB-1 Bedienungsanleitung Seite 12

For PN166S-HHB-1, PN166D-HHB-1
Open the door and using a screwdriver, remove the bottom screws from the right
1.
lower hinge.
2.Carefully slide the bottom of the door and down and place it on a padded surface to prevent
damaging it.
3.Remove the screws and hinge from the upper right hinge. Remove the plastic caps from the upper
left hinge corner.
Install the new upper left hinge that from the hardware package that includes the installation manual,
fastening the screws through the left hinge to the cabinet. Insert the plastic caps to the upper right
corner.
4.Remove the lower hinge and washer from the bottom right support bracket.
12