Pevino PN45S-HHB-1 Bedienungsanleitung Seite 11

3.Remove the screws and hinge from the upper right hinge. Remove the plastic caps from the upper
left hinge corner.
Install the new upper left hinge that from the hardware package that includes the installation manual,
fastening the screws through the left hinge to the cabinet. Insert the plastic caps to the upper right
corner.
4.Remove the lower hinge, washer, and support block from the right lower bracket.
5.Install the support block and washer removed from the right side and install the new lower left hinge
in the hardware package containing the installation manual to the bottom bracket.
6.Carefully insert the door into the upper right corner hinge, then slide the door on button
of the lower hinge and secure the door by installing the lower screws.
11