Indicators; Message; Operations; Power On/Off - Baxtran UCS Bedienungsanleitung

STN
High resolution digital crane scale

6-2. INDICATORS

MESSAGE

STB

ZERO

TARE
HOLD
Lb
Kg
N
6-3. MESSAGE
MESSAGE
- - - - -
-
SEtUP
End
oFF
ouEr
Err

7. OPERATIONS

7-1. POWER ON/OFF

Press for 1s to power-on crane scale. Crane scale perform initialization and power-
on test, 8.8.8.8.8. shows twice, weight detection - - - - - shows and then auto zero.
> For information about Auto-Zero, refer to crane scale Configuration.
Press for 1s to power-off crane scale. Message oFF shows, and then cut off power.
> When 3 batteries voltage is lower than 3.2V, crane scale will auto power-off itself.
Please replace the dead batteries with new ones.
7-2. ZERO
Press for 1s to zero. Shows ZERO.
If load is in motion, or tared, or out of Manual-Zero Range, zero is not allowed.
Manual de usuario | Manuel d'usager | User's guide | Benutzerhandbuch
All manuals and user guides at all-guides.com
NAME
Stable Shown when weight is stable
Cero Shown when weight is at zero
Tared Shown when crane scale is tared
Hold Shown when crane scale is locked
lb Shown when unit is lb
kg Shown when unit is kg
N Shown when unit is N
STAND FOR
Detect weight
In Idle Mode
SETUP User Setup Menu
END Save and exit
OFF Power off
OVERLOAD Overloading
ERROR Invalid operation
ENG
DE
NOTE
NOTE
FR ES
19