Maintenance Schedule; Checking Oil Level - Comprag FV4508 Bedienungsanleitung

5. Maintenance
5.1

Maintenance schedule

Maintenance schedule
Oil level
Compressor oil
Air filter
Oil filter
Ait-Oil Separator
Drive belt
Heat exchanger
Bearings of electric
motor
Intake valve
Minimum pressure
valve
Safety valve
Beyond 6000 working hours, compressor maintenance consists in alternating M-2 and M-3
every 2000 hours of running time. Performance of daily, weekly, monthly and annual servic-
ing does not annul the need for maintenance in terms of operating hours.
5.2

Checking oil level

Check oil level on a daily basis. In order to access the oil level, stop the compressor and
remove the front side panel. The oil level in the compressor should be checked visually with
the oil level glass (1) when the compressor has stopped. The surface of the oil must always
be visible in the sight glass. If no oil is visible in the sight glass, the oil level is low and needs
to be topped up. Using belt tension gauge, check the tensile force of the compressor belts.
+7 (800) 777-83-75(звонок бесплатный)
www.v-p-k.ru
Daily Monthly
Check/
Refill
Cleaning
Check
Cleaning
Lubricate
Interval in work hours
M-1
Yearly
500
Replace Replace
Replace
Replace Replace
Check
Check
Check
M-2 M-3 M-2
2000 4000 6000
Replace Replace
Replace Replace
Replace Replace
Replace
Replace
FV4508