Product Information - Num'axes PIE1051 Gebrauchsanleitung

Cam PIR

Product information

Set
OK
Other
Settings
Language
Date/Time
Date Type
Time stamp
Battery Type
Frequency
Cycle recording
PIE1051 - Indice C – Juillet 2021
4G Other
Exit
MENU
Programmable options (default settings in bold characters)
Français / English / Español / Deutsch / Italiano
Auto / Manual
−
Auto
Time Zone
HH:MM
UTC +/- 00:00
The camera will synchronise the date/time after you enter your time zone
information.
−
Manual
Date
20/03/2020
Manually set date/time.
NOTE: it is important to set the date and time to ensure some functions work as
expected (for example: time stamp on the photos, sending time of the daily report,
operation during defined time periods).
EU / US
EU (Europe): DD/MM/YY
US (United-States): MM/DD/YY
ON / OFF
Select "ON" if you want the date and time of the image capture imprinted on every
photo. The current temperature, moon phase and user set camera ID will also be
imprinted on the still photos.
Alkaline / Ni-MH (nickel-metal hydride)
The device will perform better if you select the type of the batteries used in the
camera.
You can purchase alkaline or rechargeable Ni-MH batteries at any time on
www.numaxes.com.
50Hz / 60Hz
An improper setting may cause the camera screen to flicker.
OFF / ON
When the SD card will be full, the camera will continue to record photos/videos by
deleting the oldest photos/video.
Select "OFF" then press "OK" to deactivate the cycle recording function.
Time
15:55:00
27/76