Solar Panel; Power Adaptor - Num'axes PIE1051 Gebrauchsanleitung

Figure 3
Figure 4
ON / SETUP / OFF
switch
3. Power supply
3.1. Batteries
The camera runs on 8 AA size batteries. The product can work with alkaline or NiMH rechargeable batteries.
You can purchase alkaline or Ni-MH AA batteries at any time on www.numaxes.com.
Please select the battery type you're using in the menu option "Battery type" to reach longer operation time.
Before inserting or removing the batteries, the camera must be turned off (switch in the OFF position).
When inserting the batteries, make sure to follow polarity indicated inside the battery slot. Upside down batteries
may cause device malfunction.
We strongly recommend changing the batteries when the power icon on the screen or photo stamp is empty.
NOTE: Don't mix battery types! This may cause permanent damage not covered by the guarantee.
3.2.

Solar panel

This camera is able to work with most standard solar panels with build-in 12V/2A lithium battery.
However, as rechargeable AA NiMH batteries need higher voltage for charging that solar panel can't charge the
batteries used in the battery slots.
3.3.

Power adaptor

This camera can also be powered by an external 12V/2A DC adapter. We recommend removing the batteries when a
power adapter is used. DC power is recommended if the camera is used for security purposes.
4. SD card
Using a memory card (from 4GB up to 32GB – class 10 minimum) is required to operate the camera.
The device also works with the NUM'AXES 64GB microSD card with adapter. 64GB memory cards from other brands
PIE1051 - Indice C – Juillet 2021
External power port
SD card slot
USB port
OK button
MENU button
Navigation buttons
 /  /  / 
19/76