Herunterladen Diese Seite drucken

WimTec FIX Serie Montageanleitung Seite 6

Wc montageelemente

Werbung

FIX
Montage Hinweise | Installation tips
Anpassung Stütztraverse / Adjusting Supporting traverse
Stütztraverse in der Höhe an die Keramik anpassen.
Unterkante der Keramik muss an der Stütztraverse aufliegen!
Adapt Supporting traverse to ceramics type in vertical direction.
Ensure the ceramics lower edge is supported by the traverse.
Stüzttraverse
Supporting traverse
Montage Armaturenanschlusswinkel / Installation tap connecting angles
Doppelte Beplankung
Double planking
Distanzscheiben verwenden
use distance washer
Einbau-Hinweise:
Die Montage und Installation darf nur durch einen konzessionierten
Fachbetrieb erfolgen.
Bei der Planung und Errichtung von Sanitäranlagen sind die entsprechenden
örtlichen, nationalen und internationalen Normen und Vorschriften zu beach-
ten. Insbesondere: DIN 1988 und ÖNorm B 5410
Der Schallschutz wird erfüllt, sofern die Planung sowie die fachgerechte
Ausführung der gesamten Sanitärinstallation im Sinne der
DIN 4109 durchgeführt wird.
6
WimTec FIX
All manuals and user guides at all-guides.com
Stüzttraverse
Supporting traverse
Einfache Beplankung
Single planking
Installation tips:
Installation of fixing board in accordance with applicable codes and
regulations only by companies certified for this type of work.
Planning and installation of sanitary systems are to be based solely on
codes and regulations applicable at the site of installation.
Applicable noise protection codes and regulations must be adhered to.

Werbung

loading