Philips HD7854 Bedienungsanleitung Seite 28

EnglisH
28
Problem Solution
There is some milk left 1. It is normal that there is some milk left in the milk container after you have
in the milk container brewed a coffee variety with milk. This extra milk is required to ensure high-
after brewing a coffee quality frothed milk.
variety with milk.
2. Perhaps you filled the milk container beyond the level required for the
coffee variety you wanted to brew.
3. You may have used milk that is not cold enough. If the milk temperature is
above the 8°C, the machine uses less milk. Make sure that you use cold milk
straight from the refrigerator (5-8°C).
The coffee varieties 1. It is normal that a coffee variety with milk is less hot than a cup of
with milk are not hot SENSEO
enough. ensure high-quality frothed milk.
2. You can preheat the cups with hot water to keep the coffee hot longer. The
best way to do this is by pressing the 1-cup button q without using a coffee
pod.
3. You may have used cups that are too large. Large cups cause the coffee to
get cold more quickly. We advise you to use a 180ml cup for cappuccino, a
260ml cup for latte macchiato and a 220ml cup for caffè latte.
The SENSEO machine You may have used milk that is too warm. Make sure that you use cold milk
®
splatters when it brews straight from the refrigerator (5-8°C).
a coffee variety with
milk.
The CALC CLEAN The CALC CLEAN indicator goes on when you need to descale the
indicator lights up machine. This happens after 1000 cups of SENSEO
continuously. of cappuccino, latte macchiato or caffè latte have been brewed. To descale
your SENSEO
CALC CLEAN indicator only goes out after the descaling procedure has
been performed correctly and the Calc-Clean tool has been removed.
I pressed the CLEAN/ 1. If you want to rinse the milk container unit, make sure that you fill the milk
CALC CLEAN button, container with cold water and that you insert the milk container unit properly
but the machine does into the machine.
not work.
2. If you want to descale the machine, make sure that the Calc-Clean tool is
placed correctly. See chapter 'Descaling' for more details.
3. Perhaps the machine is still heating up (the light ring around the on/off
button flashes slowly). The machine needs some time to heat up before
descaling is possible.
The descaling cycle The descaling cycle was probably interrupted. This can have several causes: 1)
lasted only 5 minutes. You pressed the on/off button during the descaling cycle 2) You removed the
water reservoir during the descaling cycle 3) You did not place the Calc-Clean
tool correctly or removed it from the machine during the descaling cycle.
black coffee, as the milk is heated to a lower temperature to
®
machine, follow the instructions in chapter 'Descaling'. The
®
black coffee or 250 cups
®