Device Disconnection; Device Disconnection Process - Gewiss JOINON I-ON Serie Installations- Und Bedienungsanleitung

Gewiss

Device disconnection

14. Device disconnection
This section explains how to disconnect the device. If you want to work inside the device (qualified personnel only), it is compulsory
to follow the voltage disconnection steps in the order given here.

14.1. Device disconnection process

To switch the station off completely (column versions), open the front using the key supplied, then intervene on the switch disconnector.
To switch the station off completely (WallBox version), disconnect the power supply by means of the one-way switches upstream of the
system. Only then should you open the casing (using the key supplied).
84 7.55.4.515.2 - Installation and Operation Manual