Gewiss JOINON I-ON Serie Installations- Und Bedienungsanleitung Seite 77

Faults and troubleshooting
Code Error description
Error in the control of the socket-
outlet locking motor (it doesn't
Error 6
switch from the OPEN to the
CLOSED position)
Error in the control of the socket-
outlet locking motor (it doesn't
Error 7
switch from the CLOSED to the
OPEN position)
The energy meters are no
Error 8 longer communicating with the
electronic board
7.55.4.515.2 - Installation and Operation Manual Installation and Operation Manual
Solution
Manually check the mobility
of the pin by moving the red
lever on the back of the type 2
socket-outlet locking motor.
Manually check the mobility
of the pin by moving the red
lever on the back of the type 2
socket-outlet locking motor.
Check the connection of the
Modbus line.
Check the power supply to the
energy meters.
Check the energy meters are
working properly.
Check that the component
on the Modbus line is
numbered correctly.
Gewiss
Position
77
IT
EN
FR
ES
DE
RO
HU
NL