Faults And Troubleshooting - Gewiss JOINON I-ON Serie Installations- Und Bedienungsanleitung

Faults and troubleshooting

11. Faults and troubleshooting
The station codifies any errors encountered by the electronic card. The following table explains the codes and how to solve the errors.
The operations described in this manual may only be performed by duly qualified personnel.
When this manual refers to qualified personnel, this means personnel complying with all the standards, directives and
laws concerning safety, as applicable to the installation and operation of this device.
The selection of qualified personnel is always the responsibility of the company that carries out the work, which is
the only party that can decide whether a worker is capable of doing a certain job, thereby ensuring their safety and
respecting the applicable law with regards safety in the workplace.
These companies must provide suitable training regarding the electrical devices for their personnel, and make sure they
become familiar with the content of this manual.
Code Error description
The front door is open for
maintenance or because it has
Error 1
been tampered with. The error
extends to the entire station.
The miniature circuit breaker of
the relative type 2 socket-outlet/
side is OFF.
Error 2
NB: error not managed on
the WallBox version
7.55.4.515.2 - Installation and Operation Manual Installation and Operation Manual
Solution
Close the front door to
restore correct anti-tamper
device reading.
Restore the correct operation
of the miniature circuit breaker.
If the error persists, replace the
device.
Gewiss
Position
75
IT
EN
FR
ES
DE
RO
HU
NL