Starting Signal Reception - ADE WS 2132 Bedienungsanleitung

3. Close the battery compartment again.
The locking tab must audibly engage.
4. Wait approx. 30 minutes.
The base station requires this time to collect all
weather data and to receive radio signals from the
time signal transmitter.

Starting signal reception

As soon as the base station is supplied with current, all
of the indicators on the display will fade in for a brief
moment. The display briefly lights up then and three
beeps sound.
The device then switches to receiving-
mode, during which the number of
radio waves indicates the quality of the
reception: The more radio waves shown on
the display, the better is the reception.
‚ After a short time, the weather data received by
the wireless outdoor sensor is shown on the display.
From now on, this data will be transmitted several
times a minute and constantly updated.
‚ As soon as a sufficiently strong signal has been
received from the time signal transmitter, the
corresponding data and the radio tower symbol
are permanently shown on the display. This
process can last a few minutes.
Weather station with ventilation recommendation WS 2132
52