Starting Signal Reception - ADE WS 1917 Bedienungsanleitung

1. Insert the plug of the supplied mains adaptor into the
DC 5V connection socket of the base station.
2. Plug the mains adaptor into a socket that has a voltage
corresponding to that described under "Technical Data".
3. Wait approx. 30 minutes. The base station requires this
time to collect all weather data and to receive radio
signals from the time signal transmitter.

Starting signal reception

As soon as the base station is supplied with power, all the
indicators appear briefly on the display and the display is
illuminated.
The device then switches to receiving-mode,
during which the number of radio waves indicates
the quality of the reception: The more radio waves
shown on the display, the better is the reception.
While receiving, only the
buttons are deactivated during this time.
‚ After a short time, the weather data received by the
wireless outdoor sensor is shown on the display. From
now on, this data will be transmitted several times a
minute and constantly updated.
‚ As soon as the signal from the time signal transmitter
has been received with sufficient strength, the
corresponding data and the radio tower symbol are
shown permanently on the display. This process can
last a few minutes.
60
button functions; all other
WS 1917 weather station