hanseatic HGS14355ENFW Gebrauchsanleitung Seite 59

NOTICE
Risk of damage!
If the refrigerating appliance has been
transported horizontally, lubricant from
the compressor may make its way into
the cooling circuit.
Allow the appliance to stand upright
■
for approx. 2 hours after transport
and before connecting. This allows
the lubricant enough time to fl ow
back into the compressor.
• Insert the mains plug into an easily acces-
sible and properly installed socket (220-
240 V~ / 50 Hz).
The compressor starts to work, the refrig-
erant flows through the pipes and a quiet
humming sound can be heard.
You will find all important information
about operation from page EN-13.
Page EN-25
Start-up