Operation - Wohler VIS 2000 Bedienungsanleitung

2. Operation

2. Operation
2.1 Controls
5
9
1
3
Figure 2.1 Foto Foto än-
dern
2.2 Operation of the device
2.2.1 Connection of the camera heads
All camera-heads are connected via a clutch socket with 8 poles to the cable in the
cable reel (cable jack with 8 poles).
Plug camera head and camera cable together and then turn the thread clockwise for
closing the screw connection tightly.
2.2.2 Connection of the monitors
First, unfold the monitor support while pressing the adjusting button. (Figure 2.1, part
10). Now screw the monitor out of the monitor support. After that connect the cable
connection of the cable reel (figure 2.1, part 8) to the video in-socket of the monitor.
e-mail: mgkg@woehler.de
All manuals and user guides at all-guides.com
4 7
10
2
1 Operation button
(Reset to zero during the
8
measurment, input of parame-
ters during the installation of the
new cable )
2 Cable reel
3 Stand
4 Collapsible monitor holder
6
5 Grip
6 Brake (back side)
7 Connection for 4-point-belt
8 Cable connection to the monitor
9 Attachment of the monitor con-
nection cable (Middle of the
back side)
10 Adjusting button for changing
9
the position of the monitor sup-
port
Internet: http://mgkg.woehler.de
Cable reel VIS 2000
21