NOTE!
• As long as there are steam and pressure in the water tank (18) you cannot open the safe
valve (1) .To open the water tank:
-Release steam or
-wait until the product has cooled down
• Do not exceed the water tank's (18) maximum water capacity of 250 ml
• Slowly open the safety valve (1).Before fully opening, wait a few seconds until the steam
stops hissing.
• Use the measuring cup(11) and the funnel (9) to fill the water tank (18) through the water
inlet
• Close the safety valve(1).
2)Turning Off /On
• Connect the power plug (5) to a suitable power socket.
• The power indicator (15) lights up The products starts to produce steam immediately.
• The product is ready to use when the steam indicator (16) lights up.
• Turning off the product: Disconnect the product from the power socket.
NOTE!
• The product takes around 3 minutes to preheat.
• The product has to be unplugged after use,
-before cleaning, and
-before maintenance
35
EN