EN
Cotton cover nozzle
(8)
Upholstery nozzle (7) Attach the intake to the steam outlet (17) of the product/extension
Extenstion hose (10)
Extention nozzle (13)
Angle nozzle (12)
Round Brush (14)
• Dismounting all accessories in reverse order
NOTE!
Dismounting the puller (6): Unlock the clips first
OPERATION
1) Filling the Water tank
WARNING!
Risk of electric shock! Before filling the water tank (18) Disconnect the power plug(5)from
the power socket.
ATTENTION!
Fill the water tank (18) with tap water or distilled water without any additives.If your tap
water is hard: Use distilled water. If your tap water is moderately hard: Mix distilled water
and tap water (ratio of 1:1).
Fix to the upholstery(7)
hose (10).
Screw in a clockwise direction until tight.
Attach the intake to the steam outlet (17) of the product, extension
hose (10) or extension
nozzle(13)
34