Optional Accessories; Protecting The Environment - DeWalt DWD522 Bersetzung Der Originalanweisungen

EnGLIsH
Lubrication
Your tool was properly lubricated before leaving the factory. In
from two to six months, depending upon use, take or send your
tool to an authorised service centre for a complete cleaning,
inspection and lubrication. Tools used constantly on production
jobs will need relubrication more often. Also, tools "out of
service" for long periods should be relubricated before being put
back to work.
Cleaning

WARNING: Blow dirt and dust out of the main housing
with dry air as often as dirt is seen collecting in and around
the air vents. Wear approved eye protection and approved
dust mask when performing this procedure.

WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.

Optional Accessories


WARNING: Since accessories, other than those offered
by D WALT, have not been tested with this product, use
e
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
Consult your dealer for further information on the
appropriate accessories.

Protecting the Environment

Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com.
24
WALT recommended
e