Heatsail DOME Betriebsanleitung Seite 46

EN
S T E P 2 5
Secure the two parts of the tube
with the supplied M6 set screw.
S T E P 2 6
Cut away the three elastic bands
and remove them entirely.
NOTE: Two of them are found
behind the glass. Carefully lift up
the glass to expose the bands.
S T E P 2 7
Look up and identify the
.
protective plate, remove by
cutting the three zip ties. Ensure
that all decals on the bottom of
the plate and heating element
are removed, if present.
Enjoy your brand new DOME.
46 Heatsail DOME®