Heatsail DOME Betriebsanleitung Seite 42

EN
S T E P 1 3
Using a mechanical lift, two
strong friends, or the shipping
box (as shown below) to lift the
DOME hood in preparation for
following steps.
TIP: Use a piece of tape to hold
the exposed wires at the end of
the power cable together. This will
ease its path into and through the
tube.
S T E P 1 4
Insert the curved tube and attach
it to the straight tube extending
upwards from the base.
S T E P 1 5
Insert the cable into the curved
tube. Keep pushing until you can
reach it through the opening at
OR
the bottom of the metal box.
OR
OR
42 Heatsail DOME®