Heatsail DOME Betriebsanleitung Seite 45

S T E P 2 2
Tighten the M6 screw or screws
on the tube. (See Step 6)
S T E P 2 3
Drill a hole in the mounting
surface and anchor your DOME
with the correct supplied floor
screw according to the surface
material.
NOTE: We have provided an
assortment of floor
for most the most common
surface materials. If the supplied
hardware is not suitable for your
surface, please contact your local
hardware supplier.
S T E P 2 4
Insert the control box into the
opening. Lower the cover box
over the metal box, securing the
control box behind the cover box.
User manual
screws
New buttons New buttons
DIM LOW
0 0
ON HIGH
DIM LOW
0 0
ON HIGH
EN
New buttons New buttons
DIM LOW DIM LOW
0 0 0 0
ON HIGH ON HIGH
45