Installation - multicomp pro MP700625 Bedienungsanleitung

English

1 INSTALLATION

1) Remove the balance, draft shield, top pan, AC adapter and pan support
from the packaging
2) Remove the shipping protection screw and transit disc from the top of the
balance and place the plastic top pan support on the balance. Do not use
excessive force when removing and installing the screw.
3) Gently place the plastic pan support into the receptacle and secure with the
supplied screw. Do not over-tighten the screw. It should be finger tight only.
Put the Stainless steel pan on top of the pan support
4) Place the draft shield on top of the balance, the location notches in the
breeze shield should align with the cut outs on the balance. For optimum
performance the balance should be used with the draft shield (if provided).
5) Place the balance onto a firm surface and adjust it to be level using the rear
feet before use,
1