Auto Power Off; Technical Parameters - Multicomp Pro Mp700625 Bedienungsanleitung

English
5.1.6 Format settings
The scale will print either using a format that includes stability
•
indications or one with only the weight. There are 2 settings that can
work as follows
FOR 1
FOR 2

5.1.7 Auto power off

 U sers can select the standby time before the scale will power off
automatically (when internal battery option is fitted).
•   W hen the display shows "OFF F4" press [Tare/Zero] to select time
from 0m, 5m, 10m, 20m and 30m. When 0m is selected, the function of
auto power off is turned off.
• [Unit] is to show settings between 0 and 30. [Print] is to save changes
and exit this mode.
5.5 Set Up
Users can select various settings that may be suitable for certain
applications
• FIL controls the speed of response of the weighing, it can be set from
0-6, default is 3
• ZEO controls the zero tracking, it can be set from 0-6, default is 3
• ZTR controls the sensitivity, it can be set from 0-6, default is 4
• STA controls the speed of stability indication, it can be set from 0-6,
default is 2

5.6 Technical parameters

 W hen the display shows "TECH F5" press [Tare/Zero] to enter the
Technical parameter settings menu and then enter the dealer PIN. This is
for dealers only
:
Data format is with line headings
and extra line feeds as shown in
section 7
Data format is printed as weight or
count only
12