Communications - Multicomp Pro Mp700625 Bedienungsanleitung

English

7 COMMUNICATIONS

See parameters 5.3 Setting The Printing Parameters / Accumulation section for
full information on settings
The standard Interface parameters are:
Connection details are:
RS-232 Connector: 9 pin d-subminiature socket
Pin 2 Output
Pin 3 Input
Pin 5 Signal Ground
Data Format for normal weighing operations, parts counting or recalling of totals
from memory will all be different. All lines end with a carriage return and a line
feed, (0dH and 0aH in ASCII).
Format 1 Output:
The lines will include a heading for each line then the value. A typical output when
weighing is shown below. 3 lines of data are printed followed by 2 blank lines.
G S _ _ _ _ _ _ 1 2 3 . 4 5 _ g _ <cr> <lf>
N o . _ _ _ _ _ _ _ _ _ 0 1 <cr> <lf>
T o t a l _ _ _ 1 2 3 . 4 5 _ g _ <cr> <lf>
<cr> <lf>
<cr> <lf>
When the scale is at zero the weight is not printed,
If the scale is set for continuous output the weight only is printed followed by 2
blank lines. An example of continuous output is shown below.
G T , N T ± _ _ _ _ _ 1 2 3 . 4 5 _ g _ <cr> <lf>
<cr> <lf>
<cr> <lf>
22 Characters, ST for stable/US for unstable
sign for negative weight, or a space for positive weight.
RS-232 output of weighing data
ASCII code
4800 Baud
8 data bits
No Parity
followed by GS for Gross Weight/ NT for Net Weight and then a minus
14
Generally a Null model cable is
required for
computer or printers.
19 ASCII Characters, GS for Gross Weight, NT for
Net Weight
16 Characters, Increments every time a weight is
stored
19 Characters, The total weight stored in memory
Includes 2 blank lines
connection to
Includes 2 blank lines
a