Error Messages - Multicomp Pro Mp700625 Bedienungsanleitung

English

8 ERROR MESSAGES

If an error message is shown, repeat the step that caused the message. If the
error message is still shown then contact your dealer for support.
code Description
OVER
A/D overload
err
UNDER
A/Dlow
err
Lack of power
FAIL Calibration fails
Reason
There might be weight on the
pan when the scale is
turned on.
Calibration fails.
Load cell damaged
Pan is not put on.
Calibration fails Load cell
damaged
Wrong calibration weight
Users' calibration exceeds
factory calibration by 5％
Load cell damaged
16
Solution
Remove weights
Recalibrate
Put on pan,
restart the scale.
Recalibrate
Recharge the battery
Recalibrate with
correct weight