Emerson AVENTICS PE5 Betriebsanleitung Seite 15

Fig. 7: Assembling the pressure sensor on a DIN rail
Fig. 8: DIN rail with mounted pressure sensor
14,4 mm
Fig. 9: Fix the R412010405 mounting kit with two screws
Fig. 10: Center the pressure sensor on the mounting kit and hook it in place
Fig. 11: Mounting kit with mounted pressure sensor
AVENTICS™ PE5 | R412010843-BAL-001-AG | English
3
4
2
1
Ø 5,2 mm
28 mm
1
3
2 4
Fig. 12: Opening in the control panel
Fig. 13: Insert the front frame in the cut-out
Fig. 14: Push the pressure sensor onto the front frame
Fig. 15: Attach the mounting kit at the lower mounting clip of the pressure sensor
and let it catch
40 +1
max. 5 mm
15