Herunterladen Diese Seite drucken

Längseinheit / Linear Unit - PARO PAROMAT LE 01 Bedienungsanleitung

Werbung

LE 01
Längseinheit / Linear unit
Art.-Nr.
31-5000
Merkmale
• Grundkombination
• Transportkreis für eine manuelle, halb- oder
vollautomatische Montage.
• Transportrichtung im Gegenuhrzeigersinn.
Aufbau
• Aus Standardmodulen des Paromat-Transfersystems.
• Komplett montiert und betriebsbereit.
Ausbau
• Sämtliche Module vom Paromat können
angebaut werden.
• Durch den Einbau von Erweiterungsmodulen EW 03/04
kann das LE 01 beliebig erweitert werden.
Technische Daten
• Typ
LE 01
• Art.-Nr.
31-5000
• Abmessungen:
504 x 2104 mm
• Höhe:
900 mm
• Funktion:
elektromechanisch
• El. Anschluss:
3 x 400 V / 50 Hz
• Antriebsleistung: 90 W
• Nennstrom:
0.5 A (bei Sternschaltung)
• Schutzart Motor: IP 54
• Weitere Daten gemäss Datenblätter der Module.
Steuerung
• Über die beiden Steuerkasten St 01 können die zwei
Bandmotoren ein- und ausgeschaltet werden.
• Die Bandmotoren sind gegen Überlast und Kurzschluss
abgesichert.
• Eine SPS-Steuerung ist für den Umlauf der Transport-
platten nicht notwendig.
Wartung
• Periodische Reinigung entsprechend den Umwelt-
schutzbedingungen.
Detailierte Angaben auf Anfrage
Änderungen vorbehalten
Detailed information on request
Modification reserved
Characteristics
• Basic combination
• Transport cicuit for manual, automatic or
semiautomatic assembly
• Transport direction, anti-clockwise
Comprising
• Standard modules from Paromat transport system
• Complete assembled and ready for use
Extension
• All Paromat modules can be installed
• Can be extended to include additional units like EW 03/04
Technical data
• Model
LE 01
• Art. No.
31-5000
• Size
504 x 2104 mm
• Belt height
900 mm
• Function
electro-mechanical
• Supply
3 x 400 V / 50-60 Hz
• Power
90 W
• Rated current
0.5 A (by star connection)
• Motor protection IP 54
• For further information, please refer to the respective
data sheet of the module
Control
• A control panels St 01 controls the decentralized
activation or deactivation of the two belt drive systems
• The drive systems are protected against overload or
short-circuiting
• PLC control is not required to convey the transport plates.
Maintenance
• Periodic cleaning, depending on the surrounding
conditions
PARO AG,
Tel: +41 32 613 31 41
CH-4553 Subingen
Web: www.paro.ch
Seite 5 von 62
Version 1/04

Werbung

loading