BP 03
Bypass / By-pass
Art.-Nr.
31-0980
Merkmale
• Arbeitsstation mit vorgelagerter Staustrecke.
• Aus- und Einschleusung rechtwinklig zur Haupttransport-
strecke.
• Mehrere Transportplatten können zur Bearbeitung in den
Bypass ausgeschleust werden. Dadurch bleibt die
Durchfahrt auf der Haupttransportstrecke frei.
• Mit Hilfe von Positionierungen PH 03 und Paletten-
durchlaufkontrollen wird der Palettenlauf koordiniert.
Aufbau
•
Aus Standardmodulen des Paromat-Transfersystems.
• Komplett montiert und betriebsbereit.
•
Näherungsschalter und Pneumatikventile sind im
Lieferumfang nicht enthalten.
Ausbau
• Kann an jedes Transportmodul mit ANTRIEB INNEN
angebaut werden.
• Sämtliche Module vom Paromat können
angebaut werden.
Technische Daten
•
Bandlaufhöhe:
900 mm
• Funktion:
pneumatisch, elektromechanisch
•
Luftdruck:
4 – 6 bar
• Luftanschluss:
M 5
•
Luftverbrauch:
0,10 NL (je Doppelhub bei 6 bar)
• El. Anschluss:
3 x 400 V / 50 Hz
•
Antriebsleistung: 90 W
• Nennstrom:
0.5 A (bei Sternschaltung)
•
Schutzart Motor: IP 54
•
Weitere Daten gemäss Datenblätter der Module.
Steuerung
• Über die drei Steuerkasten St 01 können die drei
Bandmotoren ein- und ausgeschaltet werden.
• Die Bandmotoren sind gegen Überlast und Kurzschluss
abgesichert.
• Für die Steuerung der Aus-/Einschleusung empfehlen wir
die SPS-Inselsteuerung mit Ventilblock St 14.
• Steuerungsbeschreibung und Programmablaufplan sind
auf Wunsch erhältlich.
Wartung
• Leicht geölte Druckluft
• Periodische Reinigung entsprechend den Umwelt-
schutzbedingungen.
Detailierte Angaben auf Anfrage
Änderungen vorbehalten
Detailed information on request
Modification reserved
Characteristics
• Work station feeding storage area upstream
• Out- inward transfer perpendicular with main
transport line
• A number of transport plates are transferred for
operation in the by-pass unit. The main line is kept free
for further transport plates to pass
• The transfer of the transport plates is coordinated by
means of stop devices PH 03 and travel control devices,
proximity switches
Comprising
• Standard modules from Paromat transport system
• Complete assembled and ready for use
• Proximity switches and air valves are not included
Extension
•
Any number of these modules can be installed along
the main transport line with INTERNAL drive
•
All Paromat modules can be installed
Technical data
• Belt height
• Function
• Air pressure
• Air connection
• Air cosumption
• Supply
• Power
•
Rated current
• Motor protection
• For further information, please refer to the respective
data sheet of the module
Control
•
A control panel St 01 cotrols the dezentralized
activation or deactivation of the two belt drive systems
•
The drive systems are protected against overload or
short-circuiting
•
For the control of the out- and inward transfer we
recommend the pluggable PLC-control St 14, with
valve block
• A programming diagram is available on request
Maintenance
• Slight lubrication of compressed air system
• Periodic cleaning, depending on the surrounding
conditions
PARO AG,
Tel: +41 32 613 31 41
CH-4553 Subingen
Web: www.paro.ch
900 mm
pneumatic, electro-mechanical
4 – 6 bar
M 5
0,10 NL (double stroke at 6 bar)
3 x 400 V / 50-60 Hz
90 W
0.5 A (by star connection)
IP 54
Seite 19 von 62
Version 1/04