Scheduling The Robot; Scheduling The Robot With The Remote Control - Blaupunkt XEASY Benutzerhandbuch

6. SCHEDULING THE ROBOT

You can schedule the robot to start cleaning in Auto Cleaning mode at a
desired start time.
•
The remote control allows you to set one start time that applies for every
day, see section 6.1
•
The Bluebot Robotics app allows you to set a different start time for each
day of the week, see 6.2
6.1

Scheduling the robot with the remote control

Use the button PLAN on the remote control to schedule a cleaning cycle.
When setting a schedule, time intervals are used for scheduling.
For example: If the current time is 8:00 am, and the remote setting number
is 01:00, then the robot will start working 1 hour later, meaning that 9:00
am has been set as the scheduled cleaning time. The robot now will
automatically start the cleaning cycle at 9:00 am every day.
NOTICE
The time interval uses integer times of 30 minutes.
50
1. Ensure the robot is in standby or charging mode.
2. Press PLAN on remote and hold for 3 seconds to enter scheduling. The
Hour numbers will flash.
3. Press the Up or Down direction buttons to change the hour.
4. Press the Right direction button to shift to the Minute numbers setting.
5. Press the Up or Down direction buttons to change the minutes.
6. Press the ON/OFF button on the remote while pointing to the robot.
You will hear an acoustic signal from the robot. Your robot will start the
cleaning cycle on the set time every day.
If necessary, you can check if the robot has already been set. Press the
PLAN button and you will hear an acoustic signal from the robot.
To cancel a schedule:
1. Follow the steps as described above and set the time interval to 00:00.
2. The schedule is now successfully cancelled.