Villager FALCON 6111 B-MATIC Originalbetriebsanleitung Seite 41

Villager
Water nozzle
The left side of the mower deck is fitted with a water nozzle for washing the deck.
(See Illustration ID-F).
 When using the water nozzle, the machine must be in the lowest height position
and placed on the lawn. This ensures that the water remains under the deck
during cleaning.
 Attach a hose to the nozzle.
 Turn on the water and start the engine.
 The rotations of the blades will ensure that the water will clean the underside of
the deck.
If above instruction is not followed, water may splash back on the gearbox and
clutch cable, which increases the risk of corrosion and damage to both parts.
This will not be covered by the warranty!
Note: For best result clean the deck with the water nozzle function right after each
mowing. If the grass dries out, this function will not work optimally.
*Note: Not all models have water nozzle.
Oil change
Oil should be changed for the first time after 2 hours, then at least 1 time per year.
Oil and oil extractor kit is not included.
Use an extractor kit and do as follows:
1. Turn on the engine and let it run for 5 min or until the engine is hot. A hot engine
liquefies the oil which makes it easier to drain.
2. Suck the oil up through the oil filler hole using the syringe that came with the oil
extractor kit. Use the hose to reach the sump.
3. Transfer the used oil into a empty container.
4. Fill the engine with SAE-30 oil.
5. Check the oil level using the dipstick. (Min / Max)
Remember to dispose the used oil so that it does no harm to nature.Use your
local recycling station.
Air Filter
The air filter should be inspected and cleaned regularly. If the filter has not been
cleaned for a long time, the engine's power will drop.
FALCON 6111 B-MATIC (GB)
18