Blaupunkt 5CE3 Serie Gebrauchsanleitung Seite 30

en
Fault
Appliance is not cooling,
temperature display and light
are lit.
The "cool-fresh"
compartment is too warm or
too cold.
30
Possible cause
Showroom mode is switched
on.
The standard setting has
been set too high or too low
(e.g. if there is frost
in the "cool-fresh"
compartment).
Remedial action
Press and hold down the alarm button,
Fig. "/5, for 10 seconds.
After a short time, check whether your
appliance is cooling.
The temperature in the "cool-fresh"
compartment can be set to be 3 steps warmer
and/or colder, Fig. ". If the refrigerator
compartment temperature is set to 0,
the "cool-fresh" compartment has
a temperature of almost 0 °C.
1. Hold down "super" button 2 for 3 seconds
until temperature display 4 flashes.
2. Change the setting using the temperature
setting button 3.
Setting -3 corresponds to the coldest
setting
Setting +3 corresponds to the warmest
setting
The selected setting is saved after one
minute.