Controls; Interior Fittings; Operating The Appliance; Switching On The Appliance - Siemens KI N Serie Gebrauchsanleitung

Controls

~ Fig. "
Button %
(
Switches the appliance on or off.
super button
0
Switches Super cooling on or off.
Button -/+ refrigerator
8
compartment
Sets the temperature of the
refrigerator compartment.
Refrigerator compartment
@
temperature display
Indicates the set temperature
in °C.
Button alarm
H
Switches the warning signal off.

Interior fittings

(not all models)
Shelf
~ Fig. #
You can vary the shelf:
Pull out and remove the shelf.
■
Container
~ Fig. $
You can remove the container:
Pull out the container all the way, lift
■
at the front and remove.
Storage compartment
~ Fig. %
You can remove the storage
compartment:
Lift up storage compartment and
■
remove.
Freezer calendar
~ Fig. !/)"
The freezer calendar indicates the
maximum storage duration in months at
a constant temperature of –18 °C.
Operating the appliance en
Ice cube tray
You can make ice cubes:
Fill the ice cube tray 3/4 full with
1.
water and place in the freezer
compartment.
If the ice cube tray is stuck to
Note:
the freezer compartment, loosen with
a blunt implement only (e.g. spoon
handle).
To loosen the ice cubes, twist the ice
2.
cube tray slightly or hold briefly
under flowing water.
Ice pack
In the event of a power failure or a fault:
The ice pack delays the warming of
■
the stored frozen food.
The longest storage time is
Note:
obtained by placing the ice pack on the
food in the top compartment.
You can take out the ice pack for
temporarily keeping food cool, e.g. in a
cool bag.
1
Operating the
appliance

Switching on the appliance

p l i a n c e O p e r a t i n g t h e a p
Press the % button.
1.
The appliance begins to cool.
Audible warning signal and lit button
alarm indicate that the freezer
compartment is still too warm.
Press the alarm button.
2.
The warning signal switches off.
Set the required temperature.
3.
~ "Setting the temperature"
on page 28
27