Adjusting The Individual Settings Of Programmes (Manual Adjustment) - Sharp LL-171ME Bedienungsanleitung

Adjusting the individual settings of
programmes
(MANUAL ADJUSTMENT)
Using "MANUAL ADJUSTMENT", you can adjust
the individual settings of programmes.
Note:
- Release the adjustment lock (see page E48)
and cancel Child Lock (see page E41) if they
have been set.
INPUT
MENU
BRIGHT
/
OK
MODE
CH
/BRIGHT
MAIN
POWER
1. Display the "PROGRAMMES" screen by
performing steps 1 to 4 of "Saving broadcast TV
channels in the memory (AUTOMATIC
SEARCH)" on page E30.
Item
Choice/Value range
CHANNEL
0-99
FREQUENCY 45.75-863.25 (MHz)
NAME
A-Z, 0-9, +, –, . , /, !, space
COLOUR SYSTEM AUTO, PAL, SECAM
SOUND SYSTEM B/G, I, D/K, L
ON
SKIP
All manuals and user guides at all-guides.com
Setting TV channels
POWER
VIEW MODE PIP
PC TV AV1 AV2
SUBPAGE REVEAL SUBTITLE TEXT
SLEEP MENU
OK
BRIGHT
BRIGHT
MODE
FREEZE
DISPLAY SOUND
/HOLD
CH
Description
The channel changes to the higher or lower channel.
Receivable frequencies depending on TV norm,
installation site, and range.
Programme name (up to five characters).
Colour norm.
TV norm.
Channels with SKIP set to "ON" will be skipped when
OFF
you press the
E31
2. Select "MANUAL ADJUSTMENT" using the
MENU button (monitor) or the
(remote control), and press the
OK/BRIGHT MODE button (monitor) or the OK
button (remote control).
MANUAL ADJUSTMENT
RETURN
CHANNEL
FREQUENCY
NAME
COLOUR SYSTEM
SOUND SYSTEM
SKIP
3. Select the desired adjustment item using the
MENU button (monitor) or the
(remote control), and press the
OK/BRIGHT MODE button (monitor) or the OK
button (remote control).
Then make the adjustment using the
(monitor) or the buttons (remote control).
(See the table below for details.)
Notes:
- You can also use the channel buttons (0-9) on
the remote control to enter the frequency.
- To adjust "NAME", first press the
OK/BRIGHT MODE button (monitor) or the OK
button (remote control) to activate the text
input mode. Then select the input position
using the buttons (monitor) or the
buttons (remote control), and select the
desired character using the
(monitor) or the buttons (remote control).
When you finish, press the OK/BRIGHT MODE
button (monitor) or the OK button (remote
control).
4. Exit the screen using the INPUT button (monitor)
or the MENU button (remote control).
Note:
- Depending on the settings in the colour system
of the channels, switching between channels
may be slow. If you want to speed up channel
switching, switch "AUTO" in "COLOUR SYSTEM"
to the current reception system ("PAL" or
"SECAM").
buttons during TV viewing.
buttons
< >
TV/AV
[ ]
1
[ 048.25MHz ]
[ E02 ]
[ PAL ]
[ ]
I
[ OFF ]
buttons
buttons
buttons