Specifications - Victron energy SmartSolar MPPT 150/70-Tr VE.Can Anleitung

Specifications

SmartSolar charge
controller
Battery voltage
Maximum battery current
Nominal PV power, 12V 1a,b)
Nominal PV power, 24V 1a,b)
Nominal PV power, 36V 1a,b)
Nominal PV power, 48V 1a,b)
Max. PV short circuit current 2)
Maximum PV open circuit
voltage
Peak efficiency
Self consumption
Charge voltage 'absorption'
Charge voltage 'float'
Charge voltage 'equalization'
Charge algorithm
Temperature compensation
Protection
Operating temperature
Humidity
Maximum altitude
Environmental condition
Pollution degree
Data communication port
Remote on/off
Relay (programmable)
Parallel operation
Colour
PV terminals
Battery terminals
Protection category
Weight
Dimensions (h x w x d)
Safety
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1V.
2) A higher sort circuit current may damage the controller in case of reverse
polarity connection of the PV array.
3) Default setting: OFF
MPPT 150/70
12/24/48V Auto Select (36V: manual)
70A
1000W
2000W
3000W
4000W
50A
(max 30A per MC4 conn.)
150V absolute maximum coldest conditions
145V start-up and operating maximum
Less than 35mA @ 12V / 20mA @ 48V
Default setting: 14,4V / 28,8V / 43,2V / 57,6V (adjustable)
Default setting: 13,8V / 27,6V / 41,4V / 55,2V (adjustable)
Default setting: 16,2V / 32,4V / 48,6V / 64,8V (adjustable)
multi-stage adaptive
-16mV/°C / -32mV/°C / -64mV/°C
Battery reverse polarity (fuse, not user accessible)
PV reverse polarity / Output short circuit / Over temperature
-30 to +60°C (full rated output up to 40°C)
5000m (full rated output up to 2000m)
VE.Can, VE.Direct or Bluetooth
DPST AC rating: 240VAC/4A DC rating: 4A up to 35VDC, 1A up to 60VDC
ENCLOSURE
35mm² / AWG2 (Tr models),
or three pairs of MC4 connectors (MC4 models)
IP43 (electronic components)
3kg
185 x 250 x 95 mm
STANDARDS
EN/IEC 62109-1
23
MPPT 150/100
70A
(max 30A per MC4 conn.)
98%
(eight preprogrammed algorithms)
or user defined algrithm
95%, non-condensing
Indoor, unconditioned
PD3
Yes (2 pole connector)
Yes
Blue (RAL 5012)
35mm² / AWG2
IP22 (connection area)
216 x 295 x 103 mm
, UL 1741, CSA C22.2
100A
1450W
2900W
4350W
5800W
4,5kg