Herunterladen Inhalt Inhalt Diese Seite drucken

Installing The Product; Declaration Of Conformity - nedis WIFIACMB1WT16 Kurzanleitung

Vorschau ausblenden Andere Handbücher für WIFIACMB1WT16:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
industry-accredited assessment authority, which authorizes their
competence to handle refrigerants safely in accordance with an
industry recognized assessment specification, can work on or
break into a refrigerant circuit.
• Servicing can only be performed as recommended by the
equipment manufacturer. Maintenance and repair requiring the
assistance of other skilled personnel can only be carried out under
the supervision of the person competent in the use of flammable
refrigerants.
• When defrosting and cleaning the product, do not use any means
other than those recommended by the manufacturing company.
• Do not puncture or heat any part of the refrigerant circuit.
• This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.

Installing the product

-
Place the product on a stable and flat surface.
-
Only move the product in an upright position.
-
Leave a minimum of 0.5 m space around the air inlet and outlet
to allow a good circulation of airflow.
-
If the product has been tilted, allow it to stand upright for 2
hours before plugging it in.
-
Only install, operate and store the product in a room with a floor
area above 7 m
.
2
-
Keep the product at a distance from flammable objects such as
furniture, curtains and similar.
-
Do not block ventilation openings and make sure that there is
enough space around the product.
Assembling the exhaust (image C)
-
Only use the provided exhaust hose.
-
Do not block the exhaust hose, this may cause overheating.
1. Assemble the exhaust hose A
exhaust hose connector A
i
2. Connect A
to the air outlet A
i
3. Extend A
5
up to 1500 mm.
-
Do not twist the exhaust hose.
-
Ensure that the exhaust hose does not kink.
4. Assemble the window kit A
5. Install A
6
in the window opening.
The window kit can be placed in horizontal and vertical
4
direction.
6. Tighten A
7
.
7. Snap A
into A
4
6
and fasten with the exhaust nozzle screw
A
p
.
Place the product on a flat and dry surface.
4
Assembling the continuous drainage (optional)
-
Works only in dehumidifying and heating mode.
1. Open the continuous drainage outlet A
2. Connect A
w
to a water container or drainage system (not
included).
Installing the Nedis SmartLife app
1. Download the Nedis SmartLife app for Android or iOS on your
phone via Google Play or the Apple App Store.
2. Open the Nedis SmartLife app on your phone.
3. Create an account with your mobile phone number or your e-mail
address and tap Continue.
4. You will receive a verification code on your mobile phone or
e-mail address.
5. Enter the received verification code.
6. Create a password and tap Done.
7. Tap Add Home to create a SmartLife Home.
8. Set your location, choose the rooms you want to connect with
and tap Done.
Adding the product to the SmartLife app
, the exhaust nozzle A
5
4
.
.
e
with the fasteners A
.
6
7
.
w
(image D)
1. Switch on the product.
2. Tap + in the Nedis SmartLife app.
3. Select the device type you want to add from the list.
4. Confirm the Wi-Fi indicator LED B
Wi-Fi button B
5. Follow the instructions in the Nedis SmartLife app.
Make sure you connect the product to a 2.4 GHz Wi-Fi network.
4
6. Rename the product after it has been found and added.
7. After confirming you can control the product with your
smartphone.
To connect your SmartLife account to Amazon Alexa and/or Google
Home, set it up using the "Smart Life" action or skill. For more details
check the instruction on either Amazon or Google.
Using the control panel and remote control
(image B)
Button
Swing button B
Timer button B
Fan speed indicator B
Fan speed button B
Up button B
and the
Display B
6
Down button B
Mode indicators B
Mode button B
Sleep mode button B
Power indicator / Full
indicator B
w
Power button B
Wi-Fi indicator LED B
Wi-Fi button B
Temperature button B

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product
WIFIACMB1WT16 from our brand Nedis
been tested according to all relevant CE standards and regulations
and that all tests have been passed successfully. This includes, but is
not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if
applicable) can be found and downloaded via:
nedis.com/wifiacmb1wt16#support
For additional information regarding the compliance, contact the
customer service:
6
r
is blinking fast, or hold the
for 5 seconds to reset the product.
t
Function
1
• Switch the oscillation on or off.
• Change the orientation of the
louvers.
Press to set the timer. Use B
2
B
6
to set the duration of cooling.
Indicates the current fan speed.
3
Press repeatedly to select the fan
4
speed.
(Not available in sleep and
dehumidifying mode).
Increase values.
5
Decrease values.
7
Indicates the current fan mode.
8
Repeatedly press the button to
9
select the mode: Cooling mode /
Dehumidifying mode / Fan mode.
Activate sleep mode. Only works in
q
cooling mode. After one hour the set
temperature increases 1 °C and again
after 2 hours.
Indicates that the water reservoir in
the product is full.
Switch the product on or off.
e
Indicates if the product is connecting
r
or connected with Wi-Fi.
Press to connect the product to a
t
Wi-Fi network.
Switch between Celsius and
y
Fahrenheit.
, produced in China, has
®
and
4

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis