Bosch PWS 600 Bedienungsanleitung Seite 12

Tool Specifications
Angle Grinder
Part number
Rated power*
Output power*
No-load speed
Grinding disk dia.
Grinder spindle threads M 10
Weight (without
optional extras) approx. 1.40 kg
Safety class
* The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries,
these values can vary.
Noise/Vibration Information
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the
product are: sound pressure level: 88 dB (A);
sound power level: 101 dB (A).
Wear ear protection!
The typical weighted acceleration is 5.0 m/s
Intended Use
The machine is intended for cutting, roughing and
brushing metal and stone materials without using
water. For cutting stone, a cutting guide is re-
quired.
Information Structures
Slots in load carrying walls are subject to the
Standard DIN 1053, Part 1 or country-specific
regulations.
These regulations are to be observed under all
circumstances. Before beginning work, consult
the responsible structural engineer, architects or
the construction supervisor.
13 • 1 609 929 807 • TMS • 02.05.01
PWS 600 PWS 600
0 603 371 0.. 0 603 371 0..
600 W 600 W
340 W 340 W
11 000 rpm 11 000 rpm
max. 100 mm max. 115 mm max. 100 mm max. 115 mm
M 14
1.40 kg
/ II / II
PWS 6-100 PWS 6-115/
PWS 620
0 603 372 0.. 0 603 372 0..
650 W 650 W/620 W
380 W 380 W/360 W
11 000 rpm 11 000 rpm
M 10 M 14
1.40 kg 1.40 kg
/ II
Machine Elements
1 On/Off switch
2 Auxiliary handle
3 Spindle lock
4 Grinder spindle
5 Protective guard
6 Screw
2
.
7 Retainer flange
(for the M 14 grinding spindle with O-ring)
8 Roughing/cutting disc*
9 Clamping nut
10
(for M 14 grinder spindle)
11 Hand protector*
12 Rubber sanding plate*
13 Sanding disc*
14 Round nut*
15 Cup brush*
16 Cutting grinder stand*
17 Length stop*
18 Diamond cutting disc*
19 Cutting guide with protective vacuuming
hood*
20 Retainer flange M 10
* Optional accessories
* Not all of the accessories illustrated or described are
included as standard delivery.
English - 1
PWS 700
0 603 373 0..
710 W
420 W
11 000 rpm
max. 100 mm max. 115 mm
M 10
1.40 kg
/ II / II
quick clamping nut*
PWS 700
0 603 373 0..
710 W
420 W
11 000 rpm
M 14
1.40 kg
/ II