Dometic DM50NTE Montage- Und Bedienungsanleitung Seite 20

Installation DM50NTE
6.7 Mounting the lock (no lock version only)
Disassembling the drawer (fig. 0, page 8)
➤ Open the drawer completely (A).
➤ Press the rail lock (A 1).
➤ Pull the drawer out of the cabinet (B).
Only for DM50NTE D:
➤ Remove the two plugs (C 1) from the screws (C 2) of the door handle (C 3).
➤ Unscrew the two screws (C 2) of the door handle.
➤ Remove the door handle (C 3).
➤ Remove the gasket.
➤ Remove the lock cover.
Drilling the holes (fig. a, page 8)
➤ Drill a hole (A 1) with a diameter of 23.6 mm through the decor (only
DM50NTE D) and the door.
➤ Unscrew the twelve screws (B 1) of the decor frame (B 2) (only DM50NTE D).
➤ Remove the decor frame (only DM50NTE D).
Assembling the lock (fig. b, page 9)
➤ Put the new lock cover (A 1) into place.
➤ Put the decor (B 1) into the decor frame.
➤ Screw (B 2) the decor frame (B 3) onto the door.
➤ Install the door lock (C 1).
➤ Install the lock catch (D 1) in the cabinet.
Assembling the drawer (fig. c, page 9)
➤ Push the gasket (1) on the decor frame (2).
➤ Screw the door handle (4) onto the door.
➤ Push the plugs (3) on the screws of the door handle (4).
➤ Push the drawer into the cabinet.
20
EN