Cleaning And Care - auna Starmaker Plus Bedienungsanleitung

EN
30
Using Programming Function
1. While in the STOP mode, press the REPEAT/PROG button (8). The
PROGRAM indicator (5) will blink and "P01" will appear on the display
indicating the fi rst program is ready to program.
2. Select the fi rst track by using the SKIP -/+ buttons (17).
3. Press the REPEAT/PROG button (8) again to confi rm the entry.
4. Repeat to set up to 20 tracks into memory. When done, press the PLAY/
PAUSE button (16) to start playback.
NOTES:
• Press the STOP button (11) twice to stop and clear the program.
• You can program up to 20 tracks for playback in any desired order.
If more than 20 tracks are attempted to be programmed, "FUL" will
appear in the display.
• The programming function is available in CD and USB mode.

CLEANING AND CARE

• Disconnect the unit from the power source when cleaning.
• If the unit becomes dusty, wipe it with a soft and dry duster.
• Use a soft cloth to clean this unit.
• Do not use any wax, polish sprays, or abrasive cleaners on the unit.
CAUTION
Risk of electric shock! Never allow any water or other liquids
to get inside the unit while cleaning.