auna Starmaker Plus Bedienungsanleitung Seite 29

NOTE: You can also long press the PAIR button (16) to disconnect any paired
devices in order to pair another device.
3. Turn on your device's BT option in settings to search for a discoverable
device with a BT signal. Select "Starmaker Plus" from the device results
on the BT menu.
NOTE: Also refer to the user manual of your BT device for detailed
instructions.
4. The BT indicator will light solid and a chime will sound.
NOTES:
• If your BT prompts you for a pass code during the pairing process,
please enter "0000" to connect.
• On some BT devices, once pairing is complete, select your BT device as
"Use as Audio Device" or similar.
• If connection is lost after successful pairing, check to make sure the
distance between speaker and BT enabled device does not exceed
30 feet/10 meters.
5. Start playback of your BT device. Press the PLAY/PAUSE button (16)
during playback to pause the song.
6. SKIP: Advance or go back one track by pressing the Skip -/+ buttons (17).
Using Recording Function
1. To record your singing as well as the music, press the REC button (10).
Recording will begin and REC indicator (9) will light solid.
2. When done recording, press the REC button (10) again, the REC
indicator (9) will turn off.
3. The recorded audio file will be recorded onto the USB drive.
4. To listen to the recorded song, press FUNCTION button (7) to switch to
USB Mode, you can find the recorded song in the REC file and press the
SKIP -/+ buttons (17) to choose the song that you want to play.
5. Press the PLAY/PAUSE button (16) to play the selected song.
NOTE: The recording function is available in BT, AUX, and CD mode. While
in CD mode, it can only record the songs with CD, CD-R, CD-RW, and CD+G
format, not available for MP3 format.
EN
29