auna Starmaker Plus Bedienungsanleitung Seite 28

EN
28
NOTES:
• If connected to a TV you will see the selected song and folders on the
TV screen.
• Press the SKIP-/+ buttons (17) to choose the song that you want to play.
5. Adjust the volume to a comfortable level using the MASTER VOL knob
(15).
NOTE: If connected to a TV or other audio source, adjust the volume of the
TV using its own volume control.
6. Connect one or two microphones to the MIC 1 (20) or MIC 2 (21) jack and
slide the ON/OFF switch on the microphone to the ON position.
7. Rotate the MIC VOL knob (12) to increase or decrease the microphone
volume as you desired, which will affect both microphones.
8. Press the ECHO -/+ buttons (14) to add an echo effect (from level 00 to
level 08) to your voice.
9. REPEAT:
• During playback, press the REPEAT/PROG button (8) once to
repeatedly play the selected song, the REPEAT indicator (3) will
blink rapidly.
• Press it again to repeatedly play the selected folder. The REPEAT
indicator (3) will blink slowly.
• Press it again to repeatedly play all the folders, the REPEAT
indicator (3) will turn solid red.
• Press it again to cancel the repeat function, the REPEAT indicator (3)
will turn off.
10. PAUSE:
• During playback, if you wish to pause the music momentarily, press
the PLAY/PAUSE button (16). The PLAY/PAUSE indicator (4) will
blink.
• Press the PLAY/PAUSE button (16) again to resume normal
playback.
11. Press the STOP button (11) to stop playback.
12. Press the POWER button (6) to turn the unit off.
Using a BT Device
To pair an external BT device, perform the following procedure:
1. Press the POWER button (6) to turn the unit on.
2. Repeatedly press the FUNCTION button (7) to select the BT, "bt" will
appear in the display. The unit automatically searches for and pairs a
previously paired BT device (if previously paired). If no previously paired
devices are present, connect as shown in the next step.