Automatic Voice Control (Avc); Cleaning And Care - auna SingSing BT Bedienungsanleitung

5. Select "SingSing BT" from the device list when it appears on the display
of your BT device. If necessary, enter the code "0000" to connect the
appliance to your BT device.
6. After successfully pairing (linking) the BT enable device the BT indicator
lights up continuously and a short signal tone is heard.
7. You can control your karaoke machine from your BT device or by using
the Play/Pause, Stop, Forward/Rewind buttons on the appliance. (Fast
Forward/Rewind does not work on the appliance when the BT device is
connected).
Programming a Loaded CD
1. Press the Stop button to stop the loaded CD.
2. Press the Program button.
3. Press the Skip/Search buttons to select a track from the loaded CD.
4. Press the Program button to program the selected track.
5. Repeat steps 4 and 5 to program up to 20 tracks to be played in a
specified order.
6. Press the Stop button to cancel the programming.

AUTOMATIC VOICE CONTROL (AVC)

With the AVC control for Automatic Voice Control, you can adjust the
volume of the appliance to compensate for varying levels of volume from
the microphone. Turn the dial to adjust the degree to which the Automatic
Voice Control compensates for variations in volume.
To manually adjust voice control use the Echo knob on the front of the
appliance.

CLEANING AND CARE

Note: Switch off the unit before cleaning. Remove the AC adapter and/
or the batteries.
• Never immerse the unit in water or other liquids for cleaning.
• Clean the surface with a soft, slightly damp cloth. Make sure that no
water enters the device.
• Never use abrasive cleaners or hard objects, such as scouring pads, for
cleaning.
• Dry the unit thoroughly after cleaning.
• Store the unit in a cool, dry place.
EN
21