Exchange/assembly of the I/O-module on power supply
Power supply
7
Terminals I/O-module
I/O-module
0
2
1
Any repair of a certified device has to be documented!
This includes stating the device serial number, date of repair, type of repair and name of the repair technician.
2
8
9
Module retainer
7.
Unscrew module retainer from power supply (it is always mounted).
8.
Plug in the I/O-module in the desired terminal or change it.
9.
Secure the I/O-module with the module retainer.
The assembly
is done in reverse order. Note the right position of display
holder (see drawing).
Adjustment or calibration is not necessary. At last adjust the safety pin (1) so
it is set over the lid and tighten the safety pin.
KA586F/00/a2/09.07
Endress+Hauser Maulburg