Safety; Use Of The Comfoswitch; Basic Functions - Zehnder ComfoSwitch C-Serie Betriebsanleitung

2

Safety

Always comply with
safety regulations in
this document. Non-
compliance with the
safety regulations,
warnings, notes and
instructions in this
document can cause
personal injury or
damage to the device.
Disconnect the
ventilation unit from
the main power before
opening the housing
of the device.
Questions
Please contact the supplier if you have any
questions. In the back of this document
is a list with the contact details of the main
suppliers.
12 - EN
3

Use of the ComfoSwitch

3.1 Basic functions

1
2
3
A
Using the ComfoSwitch you can perform the
following actions:
MODE Toggle between AUTO and
MANUAL.
■ AUTO: unit will change settings
automatically according
programmed schedulers;
■ MANUAL: unit will set the airflow
according to the input of the user
(preset away/1/2/3).
+* Increase value.
-* Decrease value.
* When AUTO mode is active any adjustments will
be overruled by the next programmed scheduler
step. If no schedule has been programmed, the
adjustment will be active for two hours. Schedules
cannot be set on the Comfoswitch, this has to be
done on another device as e.g. the HRU display.
When no button is pressed for 10 seconds all
LED indicators will dim to the set brightness. If
the set brightness is set to fully dimmed, one
of the buttons needs to be pressed to activate
the panel. The action of the pressed button
will be ignored.
B
4
C